Razor Ribbon’s new Razor Mesh Panel is the FIRST line of defense to secure a perimeter, from medium to high, to ultra-high security fencing.
Size Offerings
- Panel width: 4 ft (122cm), or 5 ft (152cm)
- Panel height: 6 ft (183 cm), 8 ft (244 cm), 10 ft (305 cm), or 12 ft (366 cm)
- Diamond size: 2″ x 6″ (51mm x 152mm) with options of 3″ x 6″ (76mm x 152mm), and 1″ x 2″ (25mm x 51mm)
Features and Benefits
- Expanded metal panel with strands of Razor Ribbon® secured on the panel
- Can be attached to any fence framework for added protection
- Imposing physical deterrent designed to keep you safe
- Anti-climb properties with small openings filled with razors
- Available in galvanized or stainless steel
- Corrosion-resistant
- 72% open with razors
- Easy installation – installs more accurately without waste, dragging, or overlapping
- Can be installed new or as a retro-fit over current chain link fence or chain link fence framework
- Fittings are some of the strongest in the industry and can be locked with breakaway nuts and bolts for added security
USES: Airport, Utilities, Refineries, Nuclear, Energy, etc.
Please Note: The expanded metal mesh is NOT welded but cut from solid steel. Expanded metal razor mesh will never have welds that fail!
SS-40 Fence Framework
SS-40 is manufactured with cold-formed steel which provides high yield and tensile strength, followed by a uniform triple layer of corrosion protection. The coating consists of zinc, a conversion coating, and a clear organic top coat applied in-line by the patented continuous Flo-Coat® process from Allied Tube & Conduit®.
SS40 Pipe Sizes
| Fence industry | Decimal O.D. Equivalent | Pipe Wall Thickness | Weight | Selection Modulus | x | Min. yield strength | = | Max Bending Moment | 10' Free Supported | Cantilever 4' | Cantilever 6' | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O.D. | (in) | (mm) | (in) | (mm) | (lb/ft) | (kg/m) | (in3) | (psi) | (lb/in) | (lb) | (lb) | (lb) | ||
| 1 3/8 | 1.315 | 33.4 | 0.104 | 2.64 | 1.35 | 2.01 | 0.1111 | x | 50000 | = | 5555 | 185 | 116 | 77 |
| 1 5/8 | 1.660 | 42.16 | 0.111 | 2.82 | 1.84 | 2.74 | 0.1961 | x | 50000 | = | 9805 | 327 | 204 | 136 |
| 2 | 1.900 | 48.26 | 0.120 | 3.05 | 2.28 | 3.39 | 0.281 | x | 50000 | = | 14050 | 468 | 293 | 195 |
| 2 1/2 | 2.375 | 60.33 | 0.130 | 3.3 | 3.12 | 4.64 | 0.4881 | x | 50000 | = | 24405 | 814 | 508 | 339 |
| 3 | 2.875 | 73.03 | 0.160 | 4.06 | 4.64 | 6.9 | 0.8778 | x | 50000 | = | 43890 | 1463 | 914 | 610 |
| 3 1/2 | 3.500 | 88.9 | 0.160 | 4.06 | 5.71 | 8.5 | 1.3408 | x | 50000 | = | 67040 | 2235 | 1397 | 931 |
| 4 | 4.000 | 101.6 | 0.160 | 4.06 | 6.56 | 9.76 | 1.7819 | x | 50000 | = | 89095 | 2970 | 1856 | 1237 |
Framework
- All installations shall be laid out by contractor in accordance with construction plans.
- Posts should be set in concrete appropriate for local conditions and anticipated wind loads.
- Install posts plumb and rails level per ASTM 2780-09 and industry standard practices.
- Post spacing shall allow for two expanded metal razor mesh panels per section and shall vary based on height and topography per manufacturer’s recommendation.
- Expanded metal razor mesh panels are installed long way of the diamond running vertically or horizontally.
- Expanded metal razor mesh panels attach to posts and rails using clamps and bands equally spaced every 15-18″.
- Clamps are sized to fit posts on the non-attack side of the fence and hold razor mesh in place with flat bar clamp on the attack side.
- Begin installation at a terminal post by attaching the panel flush with the attack side of the fence using bands.
- Attach mesh at the rails (top, mid or bottom) using clamps in a similar manner.
- Razor mesh panels shall overlap two diamonds or 4 inches and be secured to each other with clamps spaced equally along the vertical height of the fence between posts.
- Razor mesh panels additionally overlap at line posts and are attached at the line posts with clamps.
- Allied recommends the use of breakaway nuts with standard carriage bolts.
For additional information, contact 740-928-1019.
